Common Furnace Problems

Most Common Furnace Problems

Is your furnace blowing cold air instead of a blast of warm air? Are you experiencing a loud noise coming from your furnace and are not quite sure what to do about it? Such issues are a sign of problems with your HVAC system and will be the source of worry when the winter season comes knocking at your door. Knowing the common warnings can help you take the necessary corrective measures in good time so that you can have your furnace working in at optimal capacity. AC Man Of Houston came up with a list of the 4 most common furnace problems that people come across. The top furnace problems are listed below in no particular order.

1. Loud Grinding Noise

Scraping sounds that are similar to that of metal rubbing against another metal is a sure indication of something going wrong with the blower wheel. When the furnace starts making such a loud noise, then you want to switch off the machine and call AC Man Of Houston to check your furnace immediately. The issue with the blower wheel may vary so it is important to get an expert furnace repair specialist to come out and take a look. It could be that the wheel is loose and only needs to be tightened, that is if it is not damaged. If it is damaged, then the blower wheel will have to be replaced. The problem could also potentially be a broken motor mount which can be the primary cause for the entire blower assembly shaking.

2. Loud Bang When Your Furnace Kicks On

Know there may be several things going wrong when you hear your furnace making loud popping noises when it starts to run. The two likeliest culprits would be the ignitor or furnace burner are dusty, and this keeps the burning from igniting. The result of that is a buildup of gas in the furnace that then creates the loud noise. If left unchecked, it can eventually cause the heat exchanger to crack. Moreover, it is a notable problem that poses significant safety concerns and it must be taken care of immediately. Furnace repairs may require the replacement of the heat exchanger and can also help prevent a carbon monoxide leak which in many cases can be fatal. The cause of the loud bangs may also be due to the expansion and contraction of the air ducts when the system starts blowing hot air and then the cooling after that finally begins once the furnace is off. Most homeowners with HVAC systems that have metal ducts are not new to such an annoyance. If the cause of the loud noise is the air ducts, the issue at hand could be with obstructed vents, a clogged air filter or undersized ducts.

3. Whining Noise

In case the furnace produces a high-pitched sound, the problem may be with the shaft bearings that need oiling or with the blower motor or blower belt that are faulty. If you run the furnace seasonally, then it may be easy for you to pinpoint the problems and have them fixed. You may want to get advice from an expert furnace repair specialist from AC Man Of Houston. Don’t hesitate to reach out to us today. We are more than happy to help you with all of your furnace repair questions and concerns. We can help improve your indoor air quality today.

4. Furnace Blasting Cold Air

If the HVAC is producing cold air, then the issue may be due to a number of different reasons. The thermostat should be the first thing to check, which is also what any heating equipment technician will start with before looking at any other potential problems. You should check if the system is set to ‘auto’ and not ‘on’ so that the thermostat does not blow continuously and not releasing heated air. Setting it to ‘auto’ ensures that the machine only blows when the sensors can sense the need to heat up the air in the room. After the thermostat, the next thing to check are the air filters. Changing the filters every month is highly recommended because it keeps them from getting dusty and clogged up. The dust and blockage restrict the movement of air through the filters into and out of the furnace. The result of this is an overheated HVAC system which causes the equipment to stop working. The ductwork could also be the problem in that it may be installed incorrectly, it is leaking, or the wrong design was used. Such issues with the ducts could also cause the system to blow cold air and have it running continuously trying to achieve the desired heat or for a more extended period than expected to warm up the place. Besides the things mentioned above, that may be the reason behind your HVAC system blasting cold air, other causes of the heating inadequacy include normal wear and tear of the system.

For more information about common furnace problems and other related content, make sure to check our blog. If you would like to speak with a professional furnace repair specialist contact us today by giving us a call at (713) 460-2653.

The post Common Furnace Problems appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2B4bTRe
via IFTTT