Should I Cover My Air Conditioner?

Do Air Conditioners Need To Be Covered During The Winter?

Your residential HVAC system requires maintenance periodically throughout the year. When fall turns into winter, it is then the ideal time to get your Houston AC ready for the weather that lies ahead. Later in the year, as the hot days of summer transition into the cooler days of fall, it is time to shift your focus to your furnace or heating system. One question that many people ask AC Man Of Houston is whether their air conditioner needs to be covered when it is not in use during the winter season or to protect it from bad weather.

Covers Provide Protection Against Outside Elements

A lot of times, people mistakenly believe that they need to cover their air conditioner during the winter months. In fact, it is far more important to cover the outdoor Houston AC during the autumn season. This is the time of year when leaves, seeds, and other small bits of debris are falling from the trees. If these items become caught in your Houston AC unit, they can trap moisture, which can eventually cause the surface to corrode. Accumulated piles of leaves may also interfere with your air conditioning unit’s ability to drain. At the same time, you need to use caution when covering your Houston AC. Avoid covering the entire Houston AC unit. Instead, purchase a cover that extends approximately half a foot down each side of the unit. Make sure that at least a portion of the unit is exposed to the air to keep moisture from becoming trapped underneath the cover. Any moisture or condensation that can’t escape could lead to rusting or corrosion.

Protect Your Houston AC From Bad Weather

One common misconception that people have is that air conditioners need to be carefully protected from the weather. This probably stems from the fact that many summertime accessories have to be stored away during the winter. For instance, lawn chairs, patio tables, and other types of outdoor furniture are usually covered or kept indoors during the winter to keep them from getting damaged. Most Houston AC systems are tough enough, however, that they don’t need to be covered. Below are some of the primary reasons why people cover their units along with additional information on whether or not a cover is actually necessary.

1. Dirt In The AC

As your air conditioner operates, it draws in air from the surrounding area. Sometimes, it also draws in the dirt along with that air. After the unit is turned off, however, dirt is extremely unlikely to get inside, meaning that you shouldn’t need to cover it when it is not in use.

2. Ice Or Snow In Your AC

The companies that manufacture air conditioners design them to be strong enough to withstand extreme conditions during the winter months. Typically, a cover is not required to protect your unit from the weather.

3. AC Water Damage

Any type of moisture can cause damage to your air conditioner over time. Unfortunately, moisture is something that is impossible to prevent. This is especially true if you live in a humid environment. Even if your unit is covered, moisture can still get in. Covering your unit can make the situation even worse, however, since a cover can keep moisture trapped inside your Houston AC, preventing it from escaping. This can lead to problems with mold, rust, and corrosion. To avoid this problem, most experts recommend not using a cover.

4. Small Creatures

Critters like rodents tend to be drawn to places that are covered and protected when the weather changes. In this case, leaving your unit uncovered may help discourage these animals from taking up residence inside your Houston AC.

To Cover Or Not To Cover?

If you own an air conditioner, it is important to know when it should be covered and when it should be left uncovered. As a general rule of thumb, the only time that you should cover your unit is during the autumn when leaves are falling off of the trees. Make sure to choose a cover that fits the unit correctly. During the rest of the year, you should be able to leave your unit uncovered without worrying about it sustaining any damage.

For more information on Houston AC systems, contact us today by giving us a call at (713) 460-2653. If you would like to read more related content be sure to check out our blog!

The post Should I Cover My Air Conditioner? appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2Bfh1SV
via IFTTT

Types Of HVAC Systems

HVAC Basics

HVAC, which stands for Heating, Ventilation, and Air Conditioning, is a type of technology that can deliver both hot and cold air to a home. The entire purpose of these systems is to make indoor environments safe and comfortable. It can be helpful to learn more about this kind of residential or commercial technology. There are four varieties of Houston HVAC systems. AC Man of Houston pinpoints the 4 varieties of Houston HVAC systems to help you better understand the different types that exist. Every system type is available in different sizes and with different specifications, which means you should be able to find something that meets the needs of your home or business.

1. Heating and AC Split Systems

It’s very common to see split heating and AC systems. These models require system components to be placed inside and outside of a building. The majority of split Houston HVAC systems have the following qualities:

• An AC system that can cool the refrigerant.
• Furnaces that are paired with a fan or an evaporator coil that is used to convert the refrigerant before circulating air.
• A thermostat or control panel that allows you to manage your system.
• Ducts that spread air throughout a building.
• Accessories that improve indoor air quality, such as humidifiers, purifiers, UV lamps, and air cleaners.

2. Hybrid Heat Split Systems

A hybrid heat system is a more advanced version of a traditional split system. These systems are more energy efficient than classic split systems. Typically, these systems have a heat pump that allows for an electrically fueled system that is above a standard gas furnace. A cost-effective, high-quality hybrid heat split system will offer:

• A heat pump that can cool or heat the refrigerant.
• A furnace
• An evaporator coil that can convert the refrigerant and circulate air.
• Ducts that can distribute air throughout a building.

An interface that allows you to control and adjust your system, as well as optional accessories that are designed to improve air quality.

3. Duct-Free Split HVAC Systems

In some properties, a standard Houston HVAC system that uses ducts isn’t a good fit. Thankfully, a duct-free split system is also an option. It’s also possible to use these systems alongside an existing duct HVAC system. A duct-free split system should provide:

• Heat pumps and an air conditioner that allows the refrigerant to be cooled and heated.
• A compact fan coil.
• Tubing and wires that connect the fan coil to the outdoor unit.
• A control panel or thermostat.
• Optional accessories that will clean and purify the air before it is spread throughout a building.

4. Packaged Houston HVAC Systems

Smaller homes and offices might not have room for the many components of a split system. A packaged Houston HVAC system can work very well in a space like this. These units are specifically designed to distribute hot and cool air throughout confined spaces. You can expect a packaged HVAC system to contain:

• A unit that combines an air conditioner and heat pump with an evaporator and fan coil.
• A thermostat or control panel that provides full control over the system.
• Option accessories to enhance air quality, such as ventilators, air cleaners, UV lamps, or purifiers.

Now that you’re familiar with the four types of Houston HVAC systems, it will be easier for you to find the right system for your home. Ultimately, the goal of any Houston HVAC system is to keep a home comfortable by distributing clean air throughout a building. This lesson has prepared you to choose the ideal system for your own home. Use this information so that you can find a system that meets all of your needs.

Check out our blog for more related content. For more information on Houston HVAC services, contact AC Man Of Houston today by giving us a call at (713) 460-2653. Contact us today for any questions or concerns.

The post Types Of HVAC Systems appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2P6z00y
via IFTTT

What Is A Furnace?

How Do Gas Furnaces Work?

If your home has central heating, you’re fully aware of how useful it can be when temperatures drop. Relying on space heaters in the winter can be very difficult. With that being said, it’s a good idea to familiarize yourself with the different kinds of heating systems out there. To start, we’ll focus on gas furnaces. What is a furnace and how do gas furnaces work? A gas furnace is exactly what it sounds like; a furnace that’s powered through natural gas. A furnace works to heat a home during the winter. These furnaces usually work quickly, and they tend to be extremely powerful. Gas furnaces also provide cost-effective heating. How do these furnaces operate? While you’re probably not that interested in the technical details, you probably do want to know how your gas furnace operates. When you adjust the settings on your thermostat, a signal is sent to your furnace. The control board on your furnace will receive the signal and check to see if the furnace’s safeties are operating properly. It’s extremely important to monitor safeties during the heating process. AC Man Of Houston listed the top 3 important points that will break down the question we are commonly asked, “how do furnaces work.”

1. Getting Heat From A Natural Gas Furnace

Once the signal has been received and the safeties have been checked, natural gas will ignite in your furnace. The hot air generated by your furnace will be spread through your home through your ductwork. If at some point, one of the furnace’s safeties is triggered, the natural gas will be shut off and the furnace will shut down. This will ensure that you and your household will be safe even if something is wrong with your furnace. Your furnace will also set down once your thermostat has reached your desired temperature. If your home drops below the desired temperature, the signal will be sent back to the furnace, and the process will begin again. It’s an advanced process that’s absolutely fascinating. Obviously, not every system operated in the same way. The process described above refers to a single-stage furnace system that has a non-programmable furnace. Gas furnaces are very popular, and there are many different models on the market. While your furnace and your thermostat can change this process, this is still how most gas furnaces operate. If you suspect that there is an issue with your gas furnace, the best thing that you can do is shut down the system at both the power supply and the thermostat. Once you’ve done that, you should reach out to your local HVAC contractor. Are you experiencing problems with your furnace? Consider getting help from a furnace repair expert at AC Man Of Houston.

2. Fueling Your Residential Furnace

Home furnaces are a permanent appliance that delivers heat to space via some sort of intermediary movement. Steam, hot water, and air can all power this major appliance. Generally speaking, a heating appliance that operates via hot water or steam is described as a “residential hot water boiler” or a “residential steam boiler.” Natural gas is the most common fuel source for furnaces in North America, especially modern furnaces. Natural gas furnaces are popular throughout Europe as well. Other popular fuel sources include fuel oil and liquefied petroleum gas. Furnaces fueled by wood or coal are a lot rarer. In certain areas, where electricity costs are a lot lower, homes may use electrical resistance heating. It’s more common to see these heating systems in areas that don’t experience severe cold temperatures. A modern furnace can reach an efficiency level of 98% if it is a high-efficiency model. These furnaces are able to operate without chimneys. The standard gas furnace usually reaches an efficiency level of about 80%. In homes without a chimney, PVC pipes are used to ventilate waste gas and heat mechanically. This can be vented through either the roof or the side of a house. The fuel efficiency of a gas furnace is measured by AFUE or Annual Fuel Utilization Efficiency. If you are having furnace problems, make sure to contact a furnace professional today.

3. Heat Distribution Throughout Your Home

Furnaces use intermediary distribution to transfer heat to a building’s living space. Typically, furnaces are referred to as boilers if that heat is distributed through steam or hot water. A major perk offered by boilers is that they can deliver hot water for showers and washing dishes. This means that a separate water heater isn’t necessary. Of course, this advantage can also be a downside. If a boiler is malfunctioning, both heat and hot water will be unavailable. It’s standard for modern “warm air” furnaces to circulate air throughout a home using a fan. Fans can also pull cold air back towards a furnace so that it can be reheated. This process is referred to as “forced air heat.” Since a fan is able to overcome any resistance provided by a home’s ductwork, the ducts can be arranged in a number of ways. In America, it’s normal to have separate ducts that collect cooler air. The cool air usually enters the furnace through some sort of air filter. It moves through the blower before entering the furnace’s heat exchanger. After this, the now warm air is distributed throughout the space. One of the biggest perks of a system like this is that it makes it easy to install a central air condition system. The only thing that needs to be added is a cooling coil at the furnace’s outlet. Both warm and cool air can be circulated via the ductwork. The ducts can be insulated or uninsulated, and they can be made from sheet metal or a plastic material. If the ducts in a home have not been sealed with either mastic or foil duct tape, it’s likely that air will leak into unconditioned spaces in the building. For all of your furnace problems, be sure to reach out to AC Man Of Houston as indoor air quality is very important.

If you are still wondering “how do furnaces work” or “what is a furnace” then make sure to check out our blog for more related content. If you would like to speak with a professional furnace repair specialist call us today at (713) 460-2653.

The post What Is A Furnace? appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2vKTEuZ
via IFTTT

Common Furnace Problems

Most Common Furnace Problems

Is your furnace blowing cold air instead of a blast of warm air? Are you experiencing a loud noise coming from your furnace and are not quite sure what to do about it? Such issues are a sign of problems with your HVAC system and will be the source of worry when the winter season comes knocking at your door. Knowing the common warnings can help you take the necessary corrective measures in good time so that you can have your furnace working in at optimal capacity. AC Man Of Houston came up with a list of the 4 most common furnace problems that people come across. The top furnace problems are listed below in no particular order.

1. Loud Grinding Noise

Scraping sounds that are similar to that of metal rubbing against another metal is a sure indication of something going wrong with the blower wheel. When the furnace starts making such a loud noise, then you want to switch off the machine and call AC Man Of Houston to check your furnace immediately. The issue with the blower wheel may vary so it is important to get an expert furnace repair specialist to come out and take a look. It could be that the wheel is loose and only needs to be tightened, that is if it is not damaged. If it is damaged, then the blower wheel will have to be replaced. The problem could also potentially be a broken motor mount which can be the primary cause for the entire blower assembly shaking.

2. Loud Bang When Your Furnace Kicks On

Know there may be several things going wrong when you hear your furnace making loud popping noises when it starts to run. The two likeliest culprits would be the ignitor or furnace burner are dusty, and this keeps the burning from igniting. The result of that is a buildup of gas in the furnace that then creates the loud noise. If left unchecked, it can eventually cause the heat exchanger to crack. Moreover, it is a notable problem that poses significant safety concerns and it must be taken care of immediately. Furnace repairs may require the replacement of the heat exchanger and can also help prevent a carbon monoxide leak which in many cases can be fatal. The cause of the loud bangs may also be due to the expansion and contraction of the air ducts when the system starts blowing hot air and then the cooling after that finally begins once the furnace is off. Most homeowners with HVAC systems that have metal ducts are not new to such an annoyance. If the cause of the loud noise is the air ducts, the issue at hand could be with obstructed vents, a clogged air filter or undersized ducts.

3. Whining Noise

In case the furnace produces a high-pitched sound, the problem may be with the shaft bearings that need oiling or with the blower motor or blower belt that are faulty. If you run the furnace seasonally, then it may be easy for you to pinpoint the problems and have them fixed. You may want to get advice from an expert furnace repair specialist from AC Man Of Houston. Don’t hesitate to reach out to us today. We are more than happy to help you with all of your furnace repair questions and concerns. We can help improve your indoor air quality today.

4. Furnace Blasting Cold Air

If the HVAC is producing cold air, then the issue may be due to a number of different reasons. The thermostat should be the first thing to check, which is also what any heating equipment technician will start with before looking at any other potential problems. You should check if the system is set to ‘auto’ and not ‘on’ so that the thermostat does not blow continuously and not releasing heated air. Setting it to ‘auto’ ensures that the machine only blows when the sensors can sense the need to heat up the air in the room. After the thermostat, the next thing to check are the air filters. Changing the filters every month is highly recommended because it keeps them from getting dusty and clogged up. The dust and blockage restrict the movement of air through the filters into and out of the furnace. The result of this is an overheated HVAC system which causes the equipment to stop working. The ductwork could also be the problem in that it may be installed incorrectly, it is leaking, or the wrong design was used. Such issues with the ducts could also cause the system to blow cold air and have it running continuously trying to achieve the desired heat or for a more extended period than expected to warm up the place. Besides the things mentioned above, that may be the reason behind your HVAC system blasting cold air, other causes of the heating inadequacy include normal wear and tear of the system.

For more information about common furnace problems and other related content, make sure to check our blog. If you would like to speak with a professional furnace repair specialist contact us today by giving us a call at (713) 460-2653.

The post Common Furnace Problems appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2B4bTRe
via IFTTT

Top-Rated AC Repair Houston Expert: How Does An Air Conditioner Work?

#1 Houston AC Repair Company: Understanding The Basics Of An Air Conditioning System

While you are sitting inside in your cool and comfortable house, have you ever wondered how your air conditioner actually works? In the simplest terms, it is through a chemical known as a refrigerant. This chemical travels throughout the house and outdoors while removing hot air with cool air. The refrigerant will cool the air as it reenters the home and the cycle begins all over again. This aids in the process of having better overall indoor air quality. If you want to understand a fundamental breakdown of the way a residential and commercial air conditioning system works keep on reading.

1. The Parts Of An Air Conditioning

Almost all air conditioning systems consist of four parts a compressor, a condenser, an expansion device, and an evaporator. The evaporator is found within the home as this is where the refrigerant will evaporate. Fans that are located inside of the home will blow the air across the evaporator’s coils. As air from the home travels across the evaporator, the refrigerant that is in the coils will pick up the temperature from the air. The refrigerant absorbs the heat found in the air and will turn it from liquid to vapor. It goes from being a cool liquid to a hot vapor and as the heat is removed the air goes from warm to cool. Ac repair Houston specialists always emphasis the parts of the ac because if you can understand the anatomy you can more easily understand how everything functions.

2. How Air Conditioning Works

A vaporized refrigerant will pass through a compressor which is typically found outside of the air conditioning unit next to the home along with a condenser. The compressors the main job is to compress the gas into a state of high pressure and high temperature. From this point, the hot pressurized gas will flow to a third component, the condenser. It is at this junction that the gas will be condensed back to a liquid state while the heat is radiated away. An outdoor unit will have metal fins to help remove the heat at a quicker pace. The liquid that has fully cooled off is now ready to return into the home. The expansion device will regulate the flow of the liquid refrigerant into an evaporator, where once again it absorbs the key and changes from a liquid to a low-pressure gas.

3. Moisture Trap Found In An A/C

While we typically consider an air conditioner to simply just remove heat from the home, it does much more than that. Its other job is to condition the air. AC repair Houston experts say that it is always smart to understand aspects of the ac in your home in case you may need repair services. Humidity is one of the main factors of how we feel he, the more you made a room or the environment is, the less we are able to sweat and remove the unwanted body. In order for a home or business to feel more comfortable, and the air conditioner must be able to dehumidify the air and surroundings. Is there moves from the evaporator coil, the coil will absorb not only the heat but moisture as well? You now have air that is going to be much cooler and drier when it comes out of the vents and is able to make a room comfortable. The water that is rung out of the air by an air conditioner may collect or drain out of the unit on highly you middays. Almost all modern air conditioners today are able to control humidity levels indoors. In fact, it was Willis Carrier who drew up the original plans for this type of design way back in 1902. He designed the first unit not to cool the room but to control the humidity levels. The cooling of the room was an added benefit at the time. It would take almost 60 years or America to truly embrace the benefits of an air conditioner. Before that, air-conditioners were truly a luxury item and not available to everyone.

Contact A Top-Rated AC Repair Houston Company

So next time you need to call upon the services of the best AC repair Houston has to offer, just be glad you have one and it will be working so enough! Next time you are in dire need of maintenance or repair services for your air conditioner make the smart choice of picking the best ac repair Houston company in near you. AC Man Of Houston is always here to help answer any questions you may have. We are available to talk when you are ready. Contact us for a consultation or to request a quote. (713) 460-2653

 

The post Top-Rated AC Repair Houston Expert: How Does An Air Conditioner Work? appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2LqBtoB
via IFTTT

Houston AC Repair: Why Is My Air Conditioning System Not Cooling?

AC Repair Houston: Reasons Why Your Air Conditioner Is Not Keeping You Cool

Do you have an air conditioner running in your home, yet the air is not truly cool? Maybe it is blowing out warm or just plain hot air. There are several things that may be wrong with your A/C if it is not working properly. Below you are going to find the solutions to some very easy fixes that may help you to get it running properly and what can only be fixed by a professional.

Easy Air Conditioner Problems That You Can Fix

Problem 1: Thermostat Mistakes

Do you have an A/C that blows cold air at times and lukewarm other times? This may be due to the fan setting being switched to “ON”, which is going to cause the fan to run all the time, even when the air is not being cooled by the unit. Easy Solution: Simply ensure that the thermostat is set to work on “AUTO”.

Problem 2: Air Filter Issues

A dirty air filter is going to reduce the amount of air flow in the unit, which can cause several problems. First, the unit is going to struggle to circulate the correct amount of air that is needed to bring the house to the desired temperature. In addition, the evaporator coil is going to freeze up and air will not be able to circulate at all, meaning you get almost zero cool air. Solution: Take the air filter out and examine it to see if it needs a cleaning. If you are indeed having issues with your residential air conditioner, contact an ac repair Houston professional today.

Problem 3: Dirty Unit

The way an air conditioner cools a house is a rather simple process. The evaporator takes hot air in and transfers it to the outside unit known as the condenser. However, if the condenser is dirty or covered, it is not going to be able to dissipate that heat correctly. This causes the unit to overwork and not be able to cool the home properly. Solution: Gently clean the outside of the unit with a garden hose, clearing off the debris. It is important that you do not spray the unit with the hose on the highest setting as this may bend the fins that allow airflow to the condenser. While you are outside, be sure to remove all tall weeds and leaves away from the unit. You want your unit to have the ability to breathe on those hot summer days too! A clean and well-maintenanced air conditioner will bring about better indoor air quality.

Problems Only An AC Repair Houston Expert Can Solve

There are going to be problems that only a ac repair Houston professional can take on, these are just a few of them.

Problem 1: Broken Or Faulty Condenser Fan Motor

If the init’s fan has gone bad, there is no way that it can dissipate heat, which simply means you are not going to get any cold air.

Problem 2: Low Refrigerant

The refrigerant that is found in the unit is the key ingredient to absorbing the heat from the air. When there is not enough refrigerant in the unit, it is not going to be able to cool the air. If you do have low refrigerant it more than likely means you have a leak. Some typical signs that you have a leak include:

• Ice found on the outside of the unit and refrigerant line.
• A hissing or bubbling noise coming from the unit.
• The unit can not cool the home on hot sunny days but is able to work fine in the evening or on cool days.

If you see any of these signs, it is time to turn the unit and call an ac repair Houston professional as soon as possible. When you run the unit in this state, it is possible to damage the unit beyond any possible repair.

Problem 3: Faulty Compressor

The compressor of your unit is the heart of the system, it is the part that circulates the refrigerant through the unit and helps to cool it. If this part is damaged, the unit is going to be unable to cool the house. If the compressor is damaged, it is going to need to be replaced. However, this can be a rather expensive process. If you do not have a warranty on the unit, it may be best to simply replace the unit at this point.

For more insight on the latest AC Man Of Houston, articles check out our blog. If you are interested in speaking with a professional AC Repair Houston expert, contact by giving us a call today at (713) 460-2653tel:(713) 460-2653

The post Houston AC Repair: Why Is My Air Conditioning System Not Cooling? appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2LyrD39
via IFTTT

Houston Air Conditioning Repair: What Is The Life Expectancy Of My HVAC System?

Air Conditioning Repair Expert: The Life Expectancy Of Houston HVAC Systems

How long will it last? As an HVAC Houston expert, this is one question we get asked by almost all our clients every time we install a new HVAC system for them. The answer it depends. On what? Well, on how you maintain your system. Manufacturers make their systems slightly different from other and one system could last much longer than the other. For instance, if a Houston HVAC uses low-quality compressors in its systems, then the overall life expectancy of its systems will significantly drop since it is often more expensive to replace compressors than it is to replace the entire system. Below is a chart outlining the average life expectancy of a Houston HVAC system based on national averages, old estimates and how much maintenance it requires. Please remember that these are simply estimates and not guarantees. Therefore, the brand you go for could possess lower or higher life expectancy. If you are in need of assistance from a professional Houston HVAC repair company, you are in the right place.

Maintenance Tips For Your Houston HVAC System:

• Change the system’s filter regularly (preferably every 1-3 months)
• Get seasonal servicing and tune-ups
• Remove any debris within the unit
• Check and replace refrigerant insulation if need be

Zero Maintenance  (0 items)	Light Maintenance  (1-2 Items)	Medium Maintenance  (2-3 Items)	Heavy Maintenance  (4 items)
Between 15 to 18 yrs	Between 18 to 20 yrs	Between 20 to 25 yrs	25 plus yrs

Houston HVAC System Exclusions

The chart above is for an average central heating/AC system; if you still use wood stoves, oil burners or any other form of heating, then your numbers will be significantly different. Oil-based furnaces tend to last a couple of years at most and require tons of maintenance for them to run optimally. As more traditional systems, they can last a couple of years and aren’t too expensive, making them a popular option for some. Geothermal systems also aren’t included in the chart but generally last about 30 years and more. When well-maintained, these systems can last much longer than you! Boilers, on the other hand, tend to follow the chart, except that they last a bit long 1 to 3 years longer than the average HVAC system. Some additional accessories and features not included include:

• Dehumidifiers  8 to 10 years
• Humidifiers 8 to 10 years
• Duct/Ventilation Work  8 to 10 years
• Insulation 100 years
• Thermostats  35 to 40 years

Each one of these has their own life expectancy depending on the specific brand.

Average Life Expectancy Of A Houston HVAC System

Most HVAC Houston companies and organizations agree that homeowners can get anywhere between 15 and 25 years of service from the system. Some will say 15, some 20, and others 25. However, the truth is that your system will last as long as you’d want it to. As long as you are maintaining your system and have it serviced and tuned up often, your system should last you a very long time. Most homeowners in Houston decide to have theirs replaced by a professional HVAC Houston service provider for a newer, more efficient models after about 10 to 15 years. In the long run, having your system replaced every 15 to 20 years (which is the average life expectancy for most systems) is generally more economical considering the savings made from lowered energy bills and maintenance fees.

Contact A Houston HVAC Expert

If you believe it is time to get a replacement or maintenance services for your HVAC system then do not wait anymore. Contact the #1 company for all of your Houston HVAC needs. We are here to help you and bring the cool air back into your home. Call us right now.

The post Houston Air Conditioning Repair: What Is The Life Expectancy Of My HVAC System? appeared first on AC Man Houston - HVAC & Air Conditioning Repair.

from AC Man Houston – HVAC & Air Conditioning Repair https://ift.tt/2uy2ISA
via IFTTT